@article { author = {Hatami, Mahnaz and Fallah Tafti, Abbas and norouzi, نوروزی and Danesh Kazemi, Alireza}, title = {Masking Ability of Two Super High Translucent Zirconia Ceramics Compared with Lithium Disilicate Reinforced Glass Ceramic}, journal = {Journal of Mashhad Dental School}, volume = {46}, number = {3}, pages = {244-251}, year = {2022}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2022.59227.2074}, abstract = {Introduction: The masking ability of dental ceramics has an important role in the final color of all-ceramic restorations. The masking ability of super-high translucent zirconia is not clearly determined. This study aimed to evaluate the masking ability of two super high translucent zirconia (Zolid fx and DD cubeX2) in comparison to lithium disilicate reinforced glass ceramic (IPS e.max CAD LT).Materials and Methods: In this experimental study, 30 ceramic discs with 1 mm thickness and 10 mm diameter in two groups of super-high translucent zirconia (Zolid fx and DD cubex2) and one group of lithium disilicate reinforced glass ceramic (IPS e.max CAD LT) were fabricated (n=10). To determine the masking ability value (ΔE), a spectrophotometer was used to measure the color parameters of each sample (L*, a *, b*) in black and white backgrounds. One-way ANOVA and Tukey Post Hoc statistical tests were used to analyze the data. The level of significance was considered at 0.05.Results: The mean of ΔE in the three groups of IPS e.max CAD LT, Zolid fx, and DD Cubex2 were 8.37±0.47, 9.87±0.25, and 9.11±0.78 respectively. Significant differences were found in the ΔE values in the three groups (P<0.001).Conclusion: The masking abilities of two super high translucent zirconia Zolid fx and DD CubeX2 were lower than IPS e.max CAD LT. This ability was lower in Zolid fx than in DD cubeX2. }, keywords = {Masking ability,Zirconium oxide,Glass ceramic,Translucency}, title_fa = {ارزیابی قابلیت پوشانندگی دو نوع سرامیک زیرکونیا با ترانسلوسنسی بسیار بالا در مقایسه با گلاس سرامیک تقویت شده با لیتیوم دیسیلیکات}, abstract_fa = {مقدمه: قابلیت پوشانندگی سرامیک های دندانی، نقش مهمی در رنگ نهایی رستوریشن های تمام سرامیک دارد. توانایی پوشانندگی سرامیک های زیرکونیا با ترنسلوسنسی بسیار بالا به خوبی مشخص نشده است. هدف از مطالعه حاضر، بررسی قابلیت پوشانندگی دو نوع زیرکونیای با ترنسلوسنسی بسیار بالا، در مقایسه با گلاس سرامیک لیتیوم دی سیلیکات بود.مواد و روش ها: در این مطالعه تجربی،30 عدد دیسک سرامیکی با ضخامت 1 میلیمتر و قطر10 میلیمتر در دو گروه زیرکونیای با ترنسلوسنسی بسیار بالا (Zolid fx وDD Cubex2) و یک گروه گلاس سرامیک لیتیوم دی سیلیکات (IPS e.max CAD LT) تهیه شد (n=10). جهت تعیین میزان پوشانندگی( ΔE)، مشخصات رنگی هر نمونه(L*، a*،b*) بر روی زمینه سیاه و سفید توسط اسپکتروفتومتر اندازه گیری شد. داده ها با آزمون های One way ANOVA و Tukey تحلیل شدند. سطح معنی داری 05/0 در نظر گرفته شد.یافته­ها: میانگین ΔE در سه گروه IPS e.max CAD LT، Zolid fx و DD Cubex2 به ترتیب 47/0±37/8، 25/0±87/9 و 78/0±11/9 بود. میان مقادیر ΔE در هر سه گروه، تفاوت معنی داری وجود داشت. (P<0.001) نتیجه­گیری: توانایی پوشانندگی دو زیرکونیای Zolid fx و DD cube X2 با ترنسلوسنسی بسیار بالا، کمتر از IPS e.max CAD LT بود. این قابلیت در Zolid fx کمتر از DD cubex2 بود.}, keywords_fa = {قابلیت پوشانندگی,زیرکونیوم اکساید,گلاس سرامیک,ترنسلوسنسی}, url = {https://jmds.mums.ac.ir/article_20915.html}, eprint = {https://jmds.mums.ac.ir/article_20915_5044c8b3311e6e602b0bc07df802b371.pdf} }