@article { author = {Dasht, Hossein and Nakhaei, Mohammadreza and teimouri, Nafiseh}, title = {Fabrication of a Customized Ball Abutment to Correct a Nonparallel Implant Abutment for a Mandibular Implant-Supported Removable Partial Prosthesis: A Case Report}, journal = {Journal of Mashhad Dental School}, volume = {41}, number = {4}, pages = {367-372}, year = {2017}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2017.9902}, abstract = {Introduction: While using an implant-supported removable partial prosthesis, the implant abutments should be parallel to one another along the path of insertion. If the implants and their attachments are placed vertically on a similar occlusal plane, not only is the retention improved, the prosthesis will also be maintained for a longer period. Case Report: A 65-year-old male patient referred to the School of Dentistry in Mashhad, Iran with complaints of discomfort with the removable partial dentures for his lower mandible. Due to the lack of parallelism in the supporting implants, prefabricated ball abutment could not be used. As a result, a customized ball abutment was fabricated in order to correct the non-parallelism of the implants. Conclusion: Using UCLA abutments could be a cost-efficient approach for the correction of misaligned implant abutments in implant-supported overdentures.     }, keywords = {Implant-Supported Removable Partial Prosthesis Customized Ball Abutment,UCLA Abutment}, title_fa = {ساخت بال اباتمنت ریختگی جهت تصحیح ایمپلنت های غیر موازی در پروتز پارسیل متحرک متکی بر ایمپلنت مندیبل - گزارش مورد}, abstract_fa = {مقدمه: هنگام استفاده از ایمپلنت جهت ساپورت پروتز پارسیل متحرک‚ ایمپلنت ها باید باهم و با مسیر نشست و برخاست پروتز موازی باشند. اگر ایمپلنت ها و اتچمنت ها در یک مسیرو پلن اکلوزالی مشابه قرار گرفته باشند نه تنها گیر افزایش می یابد بلکه باعث افزایش طول عمر اجزاء ایمپلنت می شود. گزارش مورد: در این مطالعه، یک مرد 65 ساله با شکایت از عدم گیر و ثبات پروتز پارسیل متحرک فک پایین به دانشکده دندانپزشکی مشهد مراجعه کرد . به دلیل زاویه نامناسب ایمپلنت ها امکان استفاده از بال اباتمنت پیش ساخته وجود نداشت‚ بنابراین تصمیم گرفته شد یک بال اباتمنت اختصاصی  جهت تصحیح زاویه ایمپلنت ها  ساخته شود . نتیجه گیری: استفاده از اباتمنت های اختصاصی (UCLA) می تواند یک روش  کم هزینه  برای تصحیح عدم توازی ایمپلنت ها در اوردنچرهای متکی بر ایمپلنت باشد.  }, keywords_fa = {پروتز پارسیل متحرک متکی بر ایمپلنت,بال اباتمنت اختصاصی UCLA,اباتمنت}, url = {https://jmds.mums.ac.ir/article_9902.html}, eprint = {https://jmds.mums.ac.ir/article_9902_18677408d47d8707917bcb1b65a52148.pdf} }