@article { author = {HamediRad, Fahimeh and Ghaffari, Tahereh}, title = {Evaluation of Wear of Type III Stone Casts Made From Alginate Impressions after Being Disinfected}, journal = {Journal of Mashhad Dental School}, volume = {35}, number = {2}, pages = {65-72}, year = {2011}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2011.964}, abstract = {Introduction: Disinfection of alginate impressions by immersion or spraying method with disinfecting agents is considered for effective infection control. The purpose of this study was evaluation of wear of type III stone casts made from alginate impressions after being disinfected by spray or immersion methods. Materials & Methods: Four common disinfecting agents (5.25% Sodium hypochlorite, 2% Glutaraldehyde, Micro 10 and Deconex) were selected and the samples were divided into four groups of 40 subjects with two subgroups of 20 subjects and a group of 20 subjects were selected as the control group (totally 180 impressions). Each group was disinfected with one of disinfecting agents and each subgroup disinfected by spraying or immersion method for 8 minutes. The control group was not disinfected. After disinfecting, the impressions were poured standardly with type III stone plaster. Using wear machine, surface wear rate was calculated. The data were analyzed using descriptive statistical tests, ANOVA & LSD. Results: The mean surface wearing was statistically different in different groups. Spraying or immersion by Micro 10 and spraying by 5.25% sodium hypochlorite had the least wear and spraying and immersion by Deconex caused the greatest wear. Conclusions: Regarding reduction of surface wearing of casts from disinfected impressions, it is advised to use Micro 10 with spray or immersion methods and 5.25% sodium hypochlorite by spraying.}, keywords = {Wear,disinfection,Alginate,stone}, title_fa = {بررسی میزان سایش سطحی کست‏های ریخته شده با استون نوع III حاصل از قالب‏های آلژیناتی ضد عفونی شده}, abstract_fa = {مقدمه: ضدعفونی کردن قالب‏های آلژیناتی به وسیله مواد ضدعفونی‏کننده به روش غوطه وری یا اسپری کردن به عنوان یک روش مؤثر برای کنترل عفونت شناخته شده است. هدف از این مطالعه بررسی میزان سایش سطحی کست‏های ریخته شده با استون نوع III حاصل از قالب‏های آلژیناتی ضد عفونی شده به دو روش اسپری کردن و غوطه وری می‏باشد. مواد و روش‏ها:چهار ماده ضدعفونی کننده رایج (هیپوکلریت سدیم 25/5%، گلوتارآلدئید 2%، میکروتن و دکونکس) انتخاب و نمونه ها به چهار گروه 40 تایی با دوزیرگروه 20 تایی تقسیم شدند و یک گروه شاهد 20 تایی جهت کنترل انتخاب گردید (مجموعاً 180 قالب). هر گروه با یک ماده ضدعفونی کننده و هر زیرگروه با یک روش (اسپری کردن یا غوطه وری) به مدت 8 دقیقه ضدعفونی شدند. قالب‏های گروه شاهد ضدعفونی نشد. قالب ها با استون نوع III ریخته شدند. با استفاده از دستگاه ایجادکننده سایش سطحی، میزان سایش محاسبه شد. داده‏های به دست آمده با استفاده از آمار توصیفی، تست ANOVA و LSD مورد تجزیه و تحلیل قرار گرفت. یافته‏‏ها: میانگین میزان سایش سطحی در گروه‏های مختلف از لحاظ آماری معنی‏دار بود. اسپری کردن و غوطه وری با میکروتن و نیز اسپری کردن با هیپوکلریت سدیم25/5% کمترین میزان سایش و اسپری کردن و غوطه وریبا دکونکس بیشترین میزان سایش را داشت. نتیجه گیری: در محدوده مطالعه ما از نظرکاهش ایجادسایش سطحی در کست‏های حاصل از قالب‏های ضدعفونی شده،استفاده از میکروتن به روش اسپری کردن و غوطه وری و نیز هیپوکلریت سدیم 25/5% به روش اسپری کردن توصیه می‏شود.}, keywords_fa = {سایش,ضدعفونی کردن,آلژینات,استون}, url = {https://jmds.mums.ac.ir/article_964.html}, eprint = {https://jmds.mums.ac.ir/article_964_0aae36564649085d266cfc863bf3da7e.pdf} }