@article { author = {Ahmadzade, Asadollah and Jafari, Ehsan and Saki, Azadeh}, title = {A comparison of the shear bond strength between two zirconia cores cores on two porcelains porcelains proposed by the manufacturing company in two syhstems of VITA and IVOCLAR}, journal = {Journal of Mashhad Dental School}, volume = {37}, number = {3}, pages = {220-229}, year = {2013}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2013.687}, abstract = {Introduction: This study aims at comparing and analyzing the shear bond strength of the two zirconia cores on two porcelains proposed by the manufacturing company in two systems of VITA and IVOCLAR Materials & Methods: In this laboratory study, at first, the tooth-like brass sample was made by the CNC machine. Then, using the CAD CAM machine, 20 zirconia cores of Vita in Ceram YZ Cubes and 20 zirconia cores of IPS e. max zirCAD were provided. Half of the cores were provided using Vita VM9 porcelain and the other half were veneered with the use of IPS e. max ceram. In groups one to four, Vita Core and Veneer, Vita Core and Ivoclar Veneer, Ivoclar Core and Vita Veneer, and Ivoclar Core and Veneer were used respectively. Afterwards, the samples were put under the static force in the Universal Test machine (UTM) with the speed of 0/5 mm per minute to bring about fracture. The type of fracture was determined by electronic microscope. Schmitz-Schulmeyer Test was applied to evaluate the shear bond strength of core-veneer. In order to analyze the data, Two-Way ANOVA and logestic regression were carried out using SPSS 19 (α=0. 05). Results: The rate of shear bond strength for groups one to four were 10.85±2.67, 10.35±3.30, 10.35±3.30 and 6.72±2.47 mega pascal respectively. The type of core had no effects on shear bond strength (P=0. 869), but the veneer kind was important in the rate of shear bond strength (P=0.027). The Vita veneer showed a higher level of shear bond strength. After the microscopic evaluation, samples showed a combination of the cohesive fracture at the veneer layer and mixed (cohesive, adhesive) fracture at the edge of the two layers; No adhesive fracture between the zirconia cores and veneers was observed. Conclusion: The results show that the shear bond strength of zirconia core and the covering porcelain veneers and the fracture type are not influenced by the core type, but are affected by the type of veneer.}, keywords = {Zirconia,veneer porcelain,Shear bond strength}, title_fa = {مقایسه استحکام باند برشی دو کور زیرکونیایی به دو پرسلن به پیشنهاد کارخانه سازنده در دو سیستم VITA و IVOCLAR}, abstract_fa = {مقدمه: هدف این مطالعه مقایسه استحکام برشی دو کور زیرکونیایی به دو پرسلن به پیشنهاد کارخانه سازنده در دو سیستم VITA و IVOCLAR بود. مواد و روش‏ها: در این مطالعه آزمایشگاهی ابتدا با دستگاه CNC (Computer Numerical Control) نمونه برنجی شبیه دندان تراش خورده ساخته شد. سپس روی آن توسط دستگاه CAD_CAM 20 کور زیرکونیایی  Vita In-Ceram YZ Cubes و 20 کور زیرکونیایی IPS e max zir CAD تهیه شد. نیمی از کورها با پرسلن  VitaVM9و نیمی دیگر با IPS e. max Ceram ونیر گردید. در گروه های اول تا چهارم به ترتیب کور و ونیز Vita، کور Vita و ونیر Ivoclar، کور Ivoclar و ونیر Vita و کور و ونیر Ivoclar مورد بررسی قرار گرفت. سپس نمونه‏ها در دستگاه تست یونیورسال (UTM) با سرعت 5/0 میلی‏متر بر دقیقه تحت نیروی استاتیک قرار گرفتند تا شکست حاصل شود، نوع شکست با میکروسکوپ الکترونی مشخص شد. از تست Schmitz–Schulmeyer برای ارزیابی استحکام باند برشی کور- ونیر استفاده شد. جهت تجزیه و تحلیل اطلاعات، آنالیز واریانس دو عاملی و رگرسیون لجستیک با استفاده از SPSS با ویرایش 19 انجام شد (05/0شhi squت امده با تست های1د. داده ع شکستیورسال تست ماشین قرار گرفتند     α =). شhi squت امده با تست های1د. داده ع شکستیورسال تست ماشین قرار گرفتندشhi squت امده با تست های1د. داده ع شکستیورسال تست ماشین قرار گرفتند     یافته‏ها: مقدار استحکام باند برشی برای گروه های اول تا چهارم به ترتیب 67/2±85/10، 12/5±3/9، 30/3±35/10و 47/2±72/6 مگاپاسکال بود. نوع کور اثری در استحکام باند برشی نداشت (869/0P=) ولی نوع ونیر در میزان استحکام باند برشی مهم بود (027/0P=). ونیر Vita میزان بالاتری از استحکام باند به کور را نشان داد. برای هر دو کور بعد از ارزیابی میکروسکوپی نمونه‏ها ترکیبی از شکست‏های Cohesive در لایه ونیر و شکست Cohesive, Adhesive) Mixed) در مرز دولایه را نشان دادند و هیچ شکست کامل Adhesive)) بین کور زیرکونیایی و ونیرها مشاهده نشد. نتیجه گیری: نتایج نشان می‏دهند که استحکام باند برشی بین کور زیرکونیایی و ونیر سرامیکی پوشاننده و نوع شکست تحت تاثیر نوع کور قرار نمی‏گیرند و اما نوع ونیر موثر است.}, keywords_fa = {زیرکونیا,ونیر پرسلن,استحکام باند برشی}, url = {https://jmds.mums.ac.ir/article_687.html}, eprint = {https://jmds.mums.ac.ir/article_687_99069cffc1cba8f2de3e927bfb78f0c3.pdf} }