@article { author = {Bahri, Narges and Iliati, Hamid Reza and Sajjadi, Moosa and Boloochi, Tahereh and Bahri, Nasrin}, title = {Effects of Oral and Dental Health Education Program on Knowledge, Attitude and Short-Time Practice of Pregnant Women (Mashhad-Iran)}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {1}, pages = {1-12}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.831}, abstract = {Introduction: Physiological changes during pregnancy make pregnant mothers highly prone to various periodontal diseases. These mothers may prevent the problems to a large extent just by adhering to principles of oral and dental health. The present study was aimed at evaluating the effects of an oral and dental health education program on the knowledge, attitude and performance of pregnant women. Materials & Methods:In this field trial study, 142 pregnant woman receiving care from Khaje Rabi Regional Health Center in the city of Mashhad were chosen by random clustering sampling and randomly allocated into test and control groups. The test group had two educational sessions of 1 hour long per weeks during three weeks, focusing on generalities of oral and dental health and particularly on oral and dental health during pregnancy. Control group received no education. At the beginning, two questionnaires were completed for demographic data of the participants. Three forms were completed by all participants measuring knowledge, attitude and practice before, immediately after and two months after the education program by both groups. Analysis of data was done by SPSS software by frequency, descriptive, student t-test and paired t-test. Results: The two groups had no significant statistical difference in terms of knowledge, attitude and practice before the education program. Immediately after the education program the score of knowledge (13.8±2.53 vs 8.26±3.20, P<0.0001), attitude (40.27±5.31vs 36.30±4.59, P<0.0001) and practice (22.72±2.54 vs 18.60±2.60, P<0.0001) was significantly higher in test group. Also two months after education the score of knowledge (11.48±2.59 vs 7.92±2.61, P<0.0001), attitude (37.90±5.51vs 35.89±4.72, P=0.017) and practice (20.96±2.31 vs 19.52±3.59, P=0.005) was significantly higher in test group. Conclusions:Resultsof the present study indicated that education programs were effective in promoting knowledge, making positive attitudes, and promoting practice of pregnant woman in terms of oral and dental health.}, keywords = {Oral Health,Training programs,Knowledge,Attitude,Practice,pregnancy}, title_fa = {تاثیر برنامه آموزشی بهداشت دهان و دندان بر میزان آگاهی، نگرش و عملکرد کوتاه مدت خانم‏های باردار (مشهد-ایران)}, abstract_fa = {مقدمه: تغییرات فیزیولوژیک دوران باردای، مادران را تا حد بسیار زیای مستعد ابتلا به انواع بیماری‏های پریودنتال می‏نماید؛ مادران باردار با رعایت بهداشت دهان و دندان می‏‏توانند تا حد زیادی از این عوارض پیشگیری نمایند. این پژوهش با هدف بررسی میزان تاثیر برنامه آموزشی بهداشت د‏هان بر میزان آگاهی، نگرش و عملکرد کوتاه مدت خانم‏‏های باردار انجام شد. مواد و روش‏ها: در این کارآزمائی میدانی، 142 خانم باردار که به روش نمونه گیری خوشه‏ای تصادفی دو مرحله‏ای از بین مراکز بهداشتی مرکز منطقه‏ای سلامت خواجه ربیع مشهد انتخاب شده بودند، به طور تصادفی به گروه شاهد و آزمون تخصیص یافتند. در ابتدای مطالعه، پرسشنامه مشخصات دموگرافیک و سه فرم سنجش آگاهی، نگرش و عملکرد توسط آزمودنی ها تکمیل شد. در گروه آزمون، دو جلسه آموزشی یک ساعته در هفته، به مدت سه هفته در زمینه کلیات بهداشت دهان و دندان در دوران بارداری برگزار شد. گروه شاهد برنامه آموزشی خاصی دریافت نکردند.بلافاصله و دو ماه پس از مداخله مجدداً آگاهی، نگرش و عملکرد آزمودنی‏ها مورد ارزیابی قرار گرفت. تجزیه و تحلیل داده‏ها با استفاده از آزمون‏های آماری Paired t-test و t-student انجام شد. یافته‏ها: دو گروه از نظر نمرات آگاهی، نگرش و عملکرد قبل از مداخله، اختلاف آماری معنی‏داری نداشتند. نمرات آگاهی (53/2±8/13 در مقابل 20/3±26/8) (0001/0P<)، نگرش (31/5± 27/40 در مقابل 59/4±30/36) (0001/0P<) و عملکرد کوتاه مدت (54/2±72/22 در مقابل 60/2±60/18) (0001/0P<) بلافاصله پس از مداخله در گروه آزمون بالاتر بود و دو گروه از این نظر اختلاف آماری معنی‏داری داشتند. همچنین نمرات آگاهی (59/2±48/11 در مقابل 61/2±92/7) (0001/0>P)، نگرش (51/5±90/37 در مقابل 72/4±89/35) (017/0=P) و عملکرد کوتاه مدت (31/2±96/20 در مقابل 59/3±52 /19) (005/0=P) در گروه آزمون بالاتر از گروه شاهد بود و دو گروه از این نظر اختلاف آماری معنی‏داری داشتند. نتیجه گیری: نتایج این پژوهش نشانگر تاثیر مثبت برنامه آموزشی بر آگاهی، نگرش و بهبود عملکرد کوتاه مدت مادران باردار در زمینه بهداشت دهان و دندان بود.}, keywords_fa = {بهداشت دهان ودندان,برنامه آموزشی,آگاهی,نگرش,عملکرد,بارداری}, url = {https://jmds.mums.ac.ir/article_831.html}, eprint = {https://jmds.mums.ac.ir/article_831_2dadda73b34920d8258735d415d8ef17.pdf} } @article { author = {TahvildarNejad, Najmeh and Poosti, Maryam and Basafa, Mohammad and Mohtasham, Nooshin}, title = {Histologic Changes in Rabbit Temporo Mandibular Joint Following Local Injection of Recombinant-Bone Morphogenetic Protein-2 (rBMP2) during Mandibular Advancement by Bite Jumper}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {1}, pages = {13-22}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.832}, abstract = {Introduction: Mandibular deficiency is one of the most common malocclusions that is treated with functional appliances during growth periods. The aim of this study was to evaluate the histologic changes of the single local injection of rBMP2 in combination with bite jumper therapy in a rabbit model TMJ. Materials & Methods: Eighteen 8-week old Albino New Zealand white male rabbits were divided into three groups: The first group served as control and in the second and third groups rBMP2 and normal saline were injected respectively. The second and third groups had bite jumper appliance. After 8-weeks of bite jumper therapy, in the second group 12.5mgr rBMP2 powder plus 2.5cc normal saline and in the third group only 2.5 cc normal saline was injected in the TMJs on both sides. After 16-weeks of treatment, the animals were sacrificed and the joints were examined histologically. Results: The rBMP2 group showed greater cartilage cells and maximum condylar cartilage thickness (in the form of cartilage hyperplasia) than control and normal saline groups. The control group had the lowest disc deformity histologically and the rBMP2 group showed lower disc deformity than normal saline group. Conclusion: rBMP2 is able to accelerate condylar cartilage growth in the form of cartilage hyperplasia.}, keywords = {rBMP2,bite jumper,mandibular advancement}, title_fa = {تغییرات بافتی در ناحیه مفصل گیجگاهی- فکی خرگوش متعاقب تزریق (rBMP2) Recombinant-Bone Morphogenetic Protein-2 موضعی طی جلو آوردن فک پایین با بایت جامپر}, abstract_fa = {مقدمه: کوچکی فک پایین یکی از شایع‏‏‏ترین مال اکلوژن‏ها می‏باشد که طی دوران رشد توسط دستگاه‏های فانکشنال درمان می‏شود. هدف از این مطالعه ارزیابی تغییرات بافتی سر کندیل بعد از تزریق منفرد rBMP2 در ترکیب با دستگاه بایت جامپر (Bite jumper) در ناحیه مفصل گیجگاهی-فکی خرگوش بود. مواد و روش‏ها: هجده خرگوش سفید نیوزیلندی نر با سن 8 هفته به سه گروه تقسیم شدند: یک گروه به عنوان کنترل در نظر گرفته شد، در خرگوش های گروه دوم، تزریق rBMP2 و در گروه سوم تزریق نرمال سالین در ناحیه کندیل انجام شد. در دو گروه آخر دستگاه بایت جامپر قرار داده شد. بعد از 8 هفته از شروع درمان با این دستگاه، در گروه دوم مخلوطی از mgr5/12 پودر rBMP2 و cc5/2 نرمال سالین و در گروه سوم صرفاً cc5/2 نرمال سالین در ناحیه مفصل گیجگاهی-فکی تزریق گردید. بعد از 16 هفته از شروع درمان، حیوانات قربانی شده و بررسی بافتی مفاصل صورت گرفت. یافته‏‏ها: در نمای هیستوپاتولوژی، افزایش سلول‏‏های غضروفی و حداکثر ضخامت بافت غضروفی سر کندیل در گروه rBMP2 بیشتر از دو گروه دیگر بود (به شکل افزایش هیپرپلازی غضروف). کم‏‏‏ترین میزان دفورمیتی دیسک در گروه کنترل بود و گروه rBMP2 میزان دفورمیتی دیسک کمتری نسبت به گروه نرمال سالین نشان داد. نتیجه گیری:rBMP2 سبب افزایش فعالیت رشدی غضروف به صورت افزایش هیپرپلازی غضروف سر کندیل در خرگوش می شود.}, keywords_fa = {rBMP2,بایت جامپر,جلو آوردن فک پایین}, url = {https://jmds.mums.ac.ir/article_832.html}, eprint = {https://jmds.mums.ac.ir/article_832_bd1fefd61e0d6d635a4b32f3b469feb2.pdf} } @article { author = {Jamshidi, Shokoofeh and Zargaran, Massoumeh and Moghimbeigi, Abbas and Delkhah, Mostafa and Baghaei, Fahimeh}, title = {A Comparison between the Knowledge of Dental Students and General Dentists about Oral Squamous Cell Carcinoma (Hamadan-Iran)}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {1}, pages = {23-36}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.833}, abstract = {Introduction: Oral squamous cell carcinoma (OSCC) is the most common type of oral cancer and dentists have a vital role in its prevention and early detection. The purpose of the present study was a comparative evaluation of knowledge between fifth and sixth year dental students and general dentists in Hamadan about to OSCC. Materials & Methods: This descriptive cross-sectional study was carried outin Hamadan in 2009. Eighty general dentistsand70 dental students participated in the study and filled out our questionnaire. Datawere analyzed via SPSS software, version 16, byt-test and Pierson co-efficient correlation. Results: The mean knowledge score was 8.55±2.21 and 6.48±2.34 of 13 in students and dentists respectively which was significantly different (P< 0.001). There was not a significant correlation between either age, gender, intervalof last study about OSCC, the interest in participation in related seminars and self evaluation of students about OSCC, with their knowledge score butdentists' knowledge were declined by increase in age, time passed from graduation and the last time of their study about OSCC statistically. Conclusion: This study indicated that knowledge of dental students and general dentists aboutOSCCis not enough in Hamadan; also, there was a significant difference between them and it seems there needs to be a greater emphasis on various educational programs about this subjectboth before and after graduation.}, keywords = {Knowledge,Dental Student,general dentist,Oral squamous cell carcinoma}, title_fa = {مقایسه آگاهی دانشجویان دندانپزشکی و دندانپزشکان عمومی در ارتباط با اسکواموس سل کارسینومای دهان (همدان-ایران)}, abstract_fa = {مقدمه: اسکواموس سل کارسینومای دهانی (OSCC) شایع‏ترین سرطان دهان می‏باشد و دندانپزشکان نقشی حیاتی در پیشگیری و تشخیص زودهنگام آن دارند. هدف از مطالعه حاضر مقایسه آگاهی دانشجویان دندانپزشکی و دندانپزشکان عمومی شهر همدان در ارتباط با OSCC بود. مواد و روش‏ها: این مطالعه توصیفی- مقطعی در همدان و در سال 1388 انجام شد. 80 دندانپزشک عمومی و 70 دانشجوی دندانپزشکی در این مطالعه شرکت نموده و به پرسشنامه ما پاسخ دادند. اطلاعات با تست‏های آماری t-test و ضریب همبستگی پیرسون تجزیه و تحلیل شدند. یافته‏ها: میانگین نمره آگاهی دانشجویان و دندانپزشکان عمومی از 13 نمره، 21/2±55/8 و 34/2±48/6 بود که تفاوت معنی‏داری بین آنها وجود داشت (001/0>P). رابطه آماری معنی‏داری بین سن، جنس، فاصله زمانی آخرین مطالعه در مورد OSCC، تمایل به شرکت در سمینار‏های بازآموزی در رابطه با سرطان دهان و ارزیابی دانشجویان از میزان آگاهی خود در زمینه OSCC، با نمره آگاهی دانشجویان یافت نشد؛ اما با افزایش سن، مدت زمان فراغت از تحصیل و آخرین زمان مطالعه در رابطه با OSCC، به طور معنی‏داری از نمره آگاهی دندانپزشکان کاسته می‏شد. نتیجه‏گیری: این مطالعه نشان داد میزان آگاهی دانشجویان دندانپزشکی و دندانپزشکان عمومی در مورد OSCC به اندازه کافی نیست؛ اگرچه تفاوت معنی‏داری بین آنها وجود داشت. به نظر می‏رسد توجه بیشتر بر برنامه‏‏های آموزشیمتنوع درخصوص این موضوع هم قبل و هم بعد از فراغت از تحصیل ضروری است.}, keywords_fa = {آگاهی,دانشجوی دندانپزشکی,دندانپزشک عمومی,اسکواموس سل کارسینومای دهان}, url = {https://jmds.mums.ac.ir/article_833.html}, eprint = {https://jmds.mums.ac.ir/article_833_d7f0246f48498aeaa72b2a3be58653c0.pdf} } @article { author = {JavadiNejad, Shahrzad and Karami, Maryam and Sarlak, Zahra}, title = {Microleakage Assessment of an Adhesive system Used As a Fissure Sealant}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {1}, pages = {37-44}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.834}, abstract = {Introduction: Some studies demonstrated that adhesive systems can act as a substitute for the resin sealants to seal fissure. Therefore, it may be possible to simplify the technique by using the adhesive agent as a fissure sealant. The aim of this study was to determine the microleakage of dentine adhesive (Optibond solo plus) used as a fissure sealant. Materials & Methods: In this study, 60 intact pre-molars were chosen and divided into 3 groups. 1. Etching + opti bond soloplus, 2. Etching + Fissure sealant (synergy) 3. Etching + optibond soloplus + fissure sealant. Then the teeth were thermocycled for 500 times for 20 seconds and finally placed in distilled water. All teeth were sealed apically and coated within 1.5 mm of the sealant margin with two layers of nail varnish. The teeth were immersed in 0.5% fushin for 48 hours, and then the teeth were washed and cut off parallel to the long axis. The samples were studied in order to assess the amount of microleakage under the stereomicroscope with a magnification of 40, and were given a grading of 0 to 3. Finally, the data were analyzed using the Kruskal Wallis and Mann-Whitney tests. Results: Significant differences (P<0.05) were observed between groups 1 and 2, groups 1 and 3 and groups 2 and 3. Group 2 (fissure sealant) showed the highest microleakage scores and group 1 (Optibond solo plus) showed the lowest microleakage. Conclusion: It seems that Optibond solo plus could be used as a fissure sealant. In addition, according to study results, application of Optibond solo plus before application of fissure sealant would also reduce microleakage.}, keywords = {Fissure sealant,Microleakage,Adhesive}, title_fa = {ارزیابی ریزنشت یک سیستم چسباننده بکار رفته به عنوان فیشورسیلانت}, abstract_fa = {مقدمه: برخی مطالعات نشان داده‏اند که سیستم ‏های چسباننده می‏توانند به عنوان جایگزین سیلانت ‏های رزینی در سیل کردن شیار ‏ها عمل کنند. بنابر این استفاده از چسباننده عاجی به عنوان فیشورسیلانت ممکن است منجر به ساده‏تر شدن تکنیک شود. هدف از این مطالعه تعیین ریزنشت یک سیستم چسباننده عاجی استفاده شده به عنوان فیشورسیلانت بود. مواد و روش‏ها: در این مطالعه آزمایشگاهی، 60 دندان پره مولر سالم انتخاب و در سه گروه تقسیم شدند. گروه 1: اسیداچ + اپتی باند سولوپلاس، گروه 2: اسیداچ+ فیشورسیلانت (سینرژی) و گروه 3: اسیداچ+ اپتی باند سولوپلاس + فیشورسیلانت. دندان‏های آماده شده تحت 500 سیکل حرارتی بین دمای 5 و 55 درجه سانتی گراد قرار گرفتند. مدت استقرار در هر دما 20 ثانیه بود. سپس، نمونه ها در آب مقطر قرار گرفتند. همه دندان‏ها از آپکس و فورکا سیل شدند و تا یک و نیم میلیمتری مارجین سیلانت، با دو لایه لاک ناخن پوشیده شدند. دندان‏ها به مدت 48 ساعت در فوشین 5/0 درصد قرار داده شدند و موازی با محور طولی برش داده شدند. میزان ریزنشت بین درجه صفر تا سه تقسیم‏بندی شد. نمونه ها با بزرگنمایی 40 برابر زیر استریومیکروسکوپ ارزیابی شدند. داده ‏های آماری توسط آزمون کروسکال والیس و من ویتنی مورد آنالیز قرار گرفتند. یافته‏ها: در مقایسه دو به دوی گروه ها با یکدیگر، تفاوت آماری معنی داری (05/0P<) بین میزان ریزنشت مشاهده شد. گروه 2 (فیشور سیلانت) بیشترین و گروه 1 (اپتی باند سولو پلاس) کمترین میزان ریزنشت را نشان دادند. نتیجه گیری: به نظر می رسد بتوان از اپتی باند سولو پلاس به عنوان فیشورسیلانت استفاده کرد. به علاوه بر اساس نتایج مطالعه حاضر کاربرد این ماده قبل از فیشورسیلانت نیز باعث کاهش ریزنشت می‏شود.}, keywords_fa = {فیشورسیلانت,ریزنشت,چسباننده}, url = {https://jmds.mums.ac.ir/article_834.html}, eprint = {https://jmds.mums.ac.ir/article_834_fe85e3f266f29459513ac6085f02845a.pdf} } @article { author = {Davari, Abdolrahim and Kashfi, Maryam and MirseifiNejadNaeeni, Rahelehsadat}, title = {Comparison of Degree of Conversion of Packable and Hybrid Composites by Fourier Transform Infrared Spectroscopy}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {1}, pages = {45-52}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.835}, abstract = {Introduction: Clinical performance of light cured resin composites is related to their degree of polymerization. The purpose of this study was to compare the degree of conversion of packable and hybrid composites by FTIR (Fourier Transform Infrared Spectroscopy). Materials & Methods: In this experimental study, 40 composite disks were prepared intwo groups from Z250 and P60 composites. Each group was divided into four subgroups (2mm thickness cured with QTH unit, 2mm thickness cured with LED unit, 5mm thickness cured with QTH unit, and 5mm thickness cured with LED unit). Then samples were evaluated by FTIR to determine the degree of conversion (DC). Data were analyzed by Kolmogorov-Smirnov and three way ANOVA. Results: There was not a significant difference among the DC of the materials tested. LED significantly increased the degree of conversion of materials tested (P<0.001). DC values were significantly greater in 2mm diameter samples vs 5mm ones (P<0.001). Conclusion: The use of incremental technique in deep cavities restored with these composites is suggested. Also using LED is advised for curing composites because of a better result.}, keywords = {}, title_fa = {مقایسه درجه پلیمریزاسیون کامپوزیت‏های پک شونده و هیبرید با استفاده از Fourier Transform Infrared Spectroscopy}, abstract_fa = {مقدمه: کارایی کلینیکی کامپوزیت‏های رزینی نوری وابسته به میزان پلیمریزه شدن آنها است. هدف از این مطالعه مقایسه درجه پلیمریزاسیون کامپوزیت‏های پک شونده و هیبرید با استفاده از تکنیک FTIR (Fourier Transform Infrared Spectroscopy) بود. مواد و روش‏ها: در این مطالعه آزمایشگاهی، تعداد 40 دیسک کامپوزیتی در 2 گروه کامپوزیت‏‏های Z250 و P60 تهیه شدند. هر یک از این گروه‏ها به 4 زیرگروه (ضخامت mm 2 و mm 5 کیور شده با دستگاه QTH، ضخامت mm 2 و mm 5 کیور شده با دستگاه LED) تقسیم شدند. سپس نمونه‏ها با دستگاه FTIR جهت ارزیابی درجه پلیمریزاسیونمورد بررسی قرار گرفتند. داده‏ها توسط آنالیز واریانس سه عاملی ارزیابی شدند. یافته‏ها: میانگین درجه پلیمریزاسیون کامپوزیت‏های تست شده اختلاف معنی‏داری با یکدیگر نداشت. LED به طور معنی‏دار باعث افزایش میزان درجه پلیمریزاسیون مواد مورد آزمایش شد. (001/0P<) در ضخامت mm2 هم میزان درجه پلیمریزاسیون به طور معنی‏دار بیشتر از ضخامت mm 5 بود. (001/0P<) نتیجه گیری: استفاده از تکنیک لایه‏ای در حفرات عمیق ترمیم شده با این کامپوزیت‏ها پیشنهاد می‏شود. همچنین به دلیل نتایج بهتر استفاده از LED برای کیورینگ کامپوزیت بهتر توصیه می‏شود.}, keywords_fa = {کامپوزیت هیبرید,کامپوزیت پک شونده,درجه پلیمریزاسیون,FTIR}, url = {https://jmds.mums.ac.ir/article_835.html}, eprint = {https://jmds.mums.ac.ir/article_835_148e32e11ca4efe6064832168e2cfebc.pdf} } @article { author = {Dalili, Zahra and Tavangar, Maryam and DamanSabz, Sanaz}, title = {Agreement of Digital Intraoral Bite-Wing and Super Bite-Wing in Diagnosis of Proximal Dental Caries}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {1}, pages = {53-64}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.836}, abstract = {Introduction: One of developments in field of radiology is providing the radiographic image based on computed radiography (CR) system. Common usable capabilities of CR system are obtaining super BW (Bite-Wing) images from digital panoramic views. Considering advantages of this system such as edge enhancement, we decided to evaluate the agreement of super BW with digital intraoral BW which is produced with PSP (Phosphor Storage Plate) system in detection of proximal caries. Materials & Methods: In this study, 40 patients with bilateral BW produced by intraoral PSP sensor (Digora Optime) and digital panoramic radiography which was taken with cassette containing storage plate (Konica Minolta) were selected. First, two super BWs were extracted from digital panoramic images of the patients and then proximal caries in digital intraoral BW and super BW images were evaluated by two different observers separately. In this study, the agreement between two methods was evaluated for each observer with kappa agreement test. Results: After analysis of data, it was revealed that there was a moderate agreement between two methods in detection of caries by first and second observers (0.454, 0.421). There was a poor agreement for detection of proximal caries of premolar teeth and a moderate agreement about molar teeth between first and second observers. Interobserver agreement for both techniques was good (0.664, 0.626). Conclusion: According to the findings of this study, it seems that due to a good agreement between two observers and a moderate agreement between two techniques about detection of caries, the use of super BW method instead of intraoral BW technique is not proper and therefore, using digital intraoral BW in detection of dental caries is preffered.}, keywords = {Bite wing,Caries,Digital Radiography}, title_fa = {بررسی توافق بایت‏وینگ داخل دهانی دیجیتال و سوپربایت‏وینگ در تشخیص پوسیدگی‏های پروگزیمالی}, abstract_fa = {مقدمه: یکی از تحولات در رادیولوژی، پردازش و تهیه تصاویر رادیوگرافی با سیستم (Computed radiography) CR می‏باشد. یکی از قابلیت‏های مورد استفاده رایج در این سیستم امکان تهیه تصاویر سوپربایت‏وینگ (Bite-wing)Super  BW از تصاویر پانورامیک دیجیتال است. لذا با در نظر گرفتن مزایای این سیستم نظیر Edge enhancement بر آن شدیم که توافق این نوع BW را با BW دیجیتال داخل دهانی تهیه شده با سیستم PSP (Phosphor Storage Plate) در تشخیص پوسیدگی پروگزیمال مورد بررسی قرار دهیم. مواد و روش‏ها: در این مطالعه، تعداد 40 بیمار را که دارای BW دیجیتال دو طرف تهیه شده با سنسور داخل دهانی PSP (Digora Optime) و رادیوگرافی پانورامیک دیجیتال (CR) تهیه شده با کاست حاوی صفحات فسفری از نوع کونیکا مینولتا ((Konica Minolta بودند، انتخاب گردیدند. ابتدا از تصاویر دیجیتال این بیماران دو Super BW تهیه گردید و سپس دو مشاهده‏گر مختلف تصاویر BW و Super BW را جداگانه از نظر وجود پوسیدگی پروگزیمال ارزیابی کردند و توافق دو تکنیک برای هر کدام از دو مشاهده‏گر و توافق بین آنها با آزمون توافق کاپا مورد بررسی قرار گرفت. یافته‏ها: پس از بررسی داده‏ها مشخص گردید که توافق مشاهده‏گر اول و دوم در تشخیص پوسیدگی در حد متوسط بود (454/0 و 421/0). توافق ضعیفی در رابطه باتشخیص پوسیدگی دندان‏های پره‏مولر و توافق متوسطی در رابطه با دندان‏های مولر بین مشاهده‏گر اول و دوم وجود داشت. تفاوت بین مشاهده‏گرها برای هر دو تکنیک خوب بود (664/0 و 626/0). نتیجه‌گیری: از آنجا که در این مطالعه، دو مشاهده‏گر توافق خوبی را در مورد هر دو تکنیک داشتند ولی در زمینه تشخیص پوسیدگی در دو تکنیکتصویربرداری توافق متوسط وجود داشت، لذا به کارگیری تکنیک Super BW به جای تکنیک BW دیجیتال داخل دهانی مناسب نمی‏باشد؛ همچنان بکارگیری BW داخل دهانی در تشخیص پوسیدگی ترجیح داده می‏شود.}, keywords_fa = {بایت‏وینگ,پوسیدگی,رادیوگرافی دیجیتال}, url = {https://jmds.mums.ac.ir/article_836.html}, eprint = {https://jmds.mums.ac.ir/article_836_6dd6c2e576a8335f3edcddcabfa17acd.pdf} } @article { author = {Maleknejad, Fatemeh and Sarabi, Nasrin and ShoridehYazdi, Somaieh}, title = {Fracture Resistance and Repairability of Six Restoration Methods of Endodontically Treated Maxillary Premolars}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {1}, pages = {65-78}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.837}, abstract = {Introduction: Reconstruction of hard dental tissue after endodontic treatment is a difficult and important duty of the dentist. According to the general opinion, endodontically treated teeth are inferior in quality, more brittle, predisposed to fractures and crackings. The aim of the present study was to compare the fracture resistance of endodontically treated maxillary premolars including MOD cavities with different restoration methods Materials & Methods: Ninety intact extracted human maxillary premolars were assigned to six different restoration methods. After endodontic treatment, MOD cavities with 2/3 inter cuspal distance was prepared and restoration was carried out by one of the following methods: Group I: Buccal and palatal cusps were reduced 2mm and were restored with indirect composite onlay. Group II: The cavity preparation was same as group I, and then were restored with porcelain onlay. Group III: Reduction of palatal cusp was done as much as 2mm. One semihorizontal threaded pin was placed in buccal cusp and then was restored with amalgam. Group IV: The cavities were prepared same as group III and were restored with posterior resin composite. Group V: The MOD cavities were restored with amalgam. Group VI: The cavities were restored with posterior composite. The teeth in all groups were subjected to thermocycling and mechanical loading. Then all specimens were loaded to failure with static force in a universal testing machine at 0.5 mm/min. The mode of fracture was determined using a stereomicroscope and classified according to 3 categories, cohesive failure of tooth, and cohesive failure of restoration and mixed. Data were analyzed with ANOVA and Tukey test (a=0.05). Results: Anova showed significant differences among groups (P<0.001) Tukey test found that the highest fracture resistance were in groups I, II, IV. The most unfavorable fracture site was occurred in group 1. Conclusion: Endodontically treated maxillary premolars with wide MOD cavities could be successfully restored by indirect composite and porcelain onlay and semihorizontal threaded pin plus composite.}, keywords = {Horizontal pin,fracture resistance,endodontically treated teeth,Amalgam,resin composite}, title_fa = {مقایسه استحکام شکست و قابلیت ترمیم مجدد شش روش ترمیم پرمولرهای ماگزیلاری اندو شده}, abstract_fa = {مقدمه: بازسازی بافت سخت دندانی بعد از درمان ریشه وظیفه‏ای مهم و مشکل برای یک دندانپزشک است. طبق نظر کلی، دندان‏های درمان ریشه شده کیفیت کمتری داشته، شکننده‏تر و مستعد شکست و ترک می‏باشند. هدف از مطالعه حاضر مقایسه روش‏های مختلف ترمیم پرمولر‏‏های فک بالا با حفرات مزیواکلولوز و دیستالی(MOD) ، از نظر استحکام شکست بود. مواد و روش‏‏ها: در این مطالعه تجربی- آزمایشگاهی تعداد 90 دندان پرمولر بدون پوسیدگی جمع‏آوری شدند و بعد از درمان ریشه، برای تمام آنها حفره MOD با عرض 3/2 فاصله نوک کاسپ‏ها تهیه و به شش گروه تقسیم شدند. در گروه I : هر دو کاسپ کوتاه و حفره جهت انله کامپازیت لابراتواری آماده‏سازی گردید. در گروه II : آماده‏سازی مانند گروه قبلی انجام شد، ولی از انله پرسنلی جهت ترمیم استفاده شد. در گروه III : فقط کاسپ پالاتال mm 2 کوتاه شد، یک پین نیمه افقی در کاسپ باکال قرار گرفت و با آمالگام ترمیم شد. گروه IV : همانند گروه III آماده‏سازی و از کامپازیت خلفی جهت ترمیم استفاده شد. گروه V حفرات MOD با آمالگام و در گروه VI همان حفرات با کامپازیت خلفی ترمیم شد. دندان‏ها در تمام گروه‏ها در معرض ترموسایکلینگ و  بارهای مکانیکال قرار گرفتند و سپس نمونه‏ها در دستگاه با سرعت mm/min5/0 تحت نیروی استاتیک واقع شدند تا شکست ایجاد شود. نوع شکست با استفاده از استرئو میکروسکوپ مشخص و برطبق سه طبقه بندی، شکست کوهزیو در دندان، شکست کوهزیو در ترمیم و شکست Mixed تقسیم شد. اعداد مربوط به نیروی لازم برای شکست گردآوری شدند. از تست ANOVA برای مقایسه میانگین‏ها و از تست Tukey برای به دست آوردن اختلاف میان گروه‏ها استفاده شد. یافته‏ها: تست ANOVA اختلاف معنی‏دار بین گروه‏ها را نشان داد (001/0P<). تست Tukey نشان داد مقادیر استحکام شکست در گروه‏های اول، دوم و چهارم به نحو معنی‏داری بالاتر از سایر گروه‏هاست. گروه اول نیز بیشترین شکست زیر CEJ را نشان داد. نتیجه گیری: دندان‏های پرمولر درمان ریشه شده فک بالا با حفرات وسیع MOD می‏توانند باانله پرسلن و کامپازیت غیرمستقیم و پین نیمه افقی همراه با کامپازیت، ترمیم‏های موفقی باشند.}, keywords_fa = {پین افقی,مقاومت به شکست,دندان های اندو شده,آمالگام,کامپوزیت رزین}, url = {https://jmds.mums.ac.ir/article_837.html}, eprint = {https://jmds.mums.ac.ir/article_837_ff547af21eee968c7fbf128175e3e09d.pdf} } @article { author = {Yarjanli, Zahra and MahdaviShahri, Nasser and MoghaddamMatin, Maryam and Fereidoni, Masoud and BanihashemRad, SeyedAli}, title = {In Vitro Histological Investigation of Interactions between Rat’s Mesenchymal Stem Cells and Human Gingival Matrix}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {1}, pages = {79-90}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.838}, abstract = {Introduction: Extracellular matrix of natural tissues can be used as a scaffold for reconstructing biological tissues and organs. In this study, decellularized human gingival matrix was used as a scaffold for investigating the interactions of rat’s bone marrow mesenchymal stem cells with human gingival matrix. Materials & Methods: To reach this goal, human gingival tissues were decellularized by two detergents sodium dodecyl sulfate (SDS) and Triton X-100. After washing and sterilization procedures, scaffolds were divided into 3 groups. Low density (LD) group was cultivated with 8×104 cells /cm2, high density (HD) group was cultivated with 8×105 cells/cm2, and control (C) group, was maintained in culture medium without any cells. Microscopic sections were prepared from the scaffoldsbefore and after 1, 2 and 4 weeks of culture with mesenchymal cells and were stained with Hematoxylin-Eosin. Repeated measure ANOVA was used to study the cell density alteration significance within the matrixes and post tests of means comparisons were performed within and between the groups. Also, gingival samples before and after decellularization procedure were investigated by scanning electron microscopy. Results: Histological study of decellularized scaffolds revealed that nuclear and cellular components of the tissues were completely removed. Scanning electron microscopy of the scaffolds indicated that collagen fibers of connective tissue remained intact. Study of the scaffolds 1, 2 and 4 weeks after culture, revealed penetration of mesenchymal stem cells in scaffold, migration of cells towards connective tissue’s papilla, and moreover epithelium-like structures. Statistical analysis indicated that cell density in HD group was significantly (P<0.05) higher than LD group. Cell density in both LD and HD groups significantly increased at 2nd week and decreased after4 weeks of culture. Conclusion: According to the results, scaffolds prepared from human gingival matrix can be a suitable scaffold for studying In vitro cell behaviors during oral wound healing.}, keywords = {Extracellular matrix,epithelium,interaction,Scaffold,human gingiva,Mesenchymal stem cells}, title_fa = {بررسی هیستولوژیکی برهم‌کنش میان سلول‌های بنیادی مزانشیمی رت ویستار با ماتریکس لثه‌ انسان در شرایط آزمایشگاهی}, abstract_fa = {مقدمه: ماتریکس خارج سلولی بافت‌های طبیعی را می‌توان برداشت و به عنوان داربست زیستی برای بازسازی بافت‌ها و اندام‌ها بکار برد. در این مطالعه از ماتریکس سلول‌زدایی شده بافت لثه انسان، به عنوان داربستی جهت بررسی برهم‍کنش‍‌های هیستولوژیک میان سلول‌های بنیادی مزانشیمی گرفته شده از مغز استخوان رت ویستارو ماتریکس خارج سلولی بافت لثه‌ انسان، استفاده گردید. مواد و روش‌ها: برای وصول به این هدف، ابتدا بافت‌های لثه انسان با استفاده از دو شوینده‌ سدیم دودسیل سولفات (SDS) و تریتون X-100 سلول‌زدایی شدند. پس از مراحل شستشو و استریلیزاسیون، داربست‌ها به سه گروه تقسیم شدند: گروه کم‌تراکم (LD) که با cells /cm2 104×8 سلول و گروه پرتراکم (HD) که با cells /cm2105×8 سلول کشت شدند و گروه کنترل (C) که بدون سلول در محیط کشت نگه داشته شد. از داربست‌های تهیه شدهقبل و پس از گذشت 1، 2 و 4 هفته از کشت با سلول‌های مزانشیمی، مقاطع میکروسکوپی تهیه و با استفاده از هماتوکسیلین-ائوزین رنگ‌آمیزی شدند. معنی‏داری تغییرات تراکم سلولی داربست‏های سلولی به روش Repeated measure ANOVA و پس آزمون مقایسه میانگین‏ها به طور درون و برون گروهی بررسی شد و همچنین تعدادی از نمونه‌های لثه قبل و پس از فرآیند سلول‌زدایی مورد مطالعات میکروسکوپ الکترونی نگاره قرار گرفتند. یافته‌ها: مطالعه‌ هیستولوژیک داربست‌ها پس از سلول‌زدایی نشان داد که هسته‌ها و اجزای سلولی به طور کامل از بافت حذف شده‌اند. بررسی با میکروسکوپ الکترونی نگاره مشخص کرد که طی فرآیند سلول‌زدایی، رشته‌های کلاژن در بافت همبند سالم مانده است. مطالعه‌داربست‌ها 1، 2 و 4 هفته پس از کشت نفوذ سلول‌های بنیادی مزانشیمی در داربست، مهاجرت سلول‌ها به سمت پاپیلاهای بافت همبند و تشکیل ساختارهای شبه اپیتلیوم را نشان داد. آنالیزهای آماری مشخص کرد که تراکم سلولی در داربست‌های گروه HD به طور معنی‏داری (05/0P<) بیشتر از گروه LD بود. تراکم سلولی در هر دو گروه LD و HD در هفته‌ دوم افزایش معنی‏دار و در هفته‌ چهارم کاهش معنی‏داری یافت. نتیجه‌گیری: نتایج حاصل نشان می‌دهد که داربست حاصل از ماتریکس لثه انسان می‌تواند بستر مناسبی جهت بررسی رفتارهای سلولی طی ترمیم زخم‌های دهانی در شرایط آزمایشگاهی باشد.}, keywords_fa = {ماتریکس خارج سلولی,اپیتلیوم,برهم کنش,داربست,لثه انسان,سلول‌های بنیادی مزانشیمی}, url = {https://jmds.mums.ac.ir/article_838.html}, eprint = {https://jmds.mums.ac.ir/article_838_75f06c0609ba5df5c8a12ce747857ed1.pdf} } @article { author = {Vaezi, Tooraj and Kazemian, Mozhgan}, title = {Displacement of Mandibular Third Molar into the Submandibular Space during Extraction (Case Report)}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {1}, pages = {91-94}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.839}, abstract = {Introduction: Displacement of third molar into anatomical spaces is a rare complication of tooth extraction. In this paper a case of mandibular third molar displacement into submandibular space will be presented. Case Report: The case was a 33 year old man who had visited his dentist for impacted third molar extraction. During applying elevator, the tooth disappeared and was displaced into oral floor. Conclusion: For performing wisdom tooth surgery, one must completely evaluate tooth position and use appropriate technique and instruments.}, keywords = {complication,submandibular space,third molar}, title_fa = {جابه جا شدن دندان مولر سوم مندیبل به فضای تحت فکی حین کشیدن (گزارش مورد)}, abstract_fa = {مقدمه: جابجا شدن دندان مولر سوم به فضاهای آناتومیک یکی ازعوارض نادرحین خارج کردن دندان می‏باشد. در این مقاله یک مورد جابجا شد ن تصادفی دندان مولرسوم فک پائین به فضای تحت فکی گزارش می‏شود. گزارش مورد: بیمار آقای 33 ساله جهت خارج کردن دندان عقل به دندانپزشک مراجعه کرده بود. حین استفاده از الواتور،دندان ناپدید شده و وارد کف دهان شده بود. نتیجه گیری: برای جراحی دندان عقل بایستی قبل ازجراحی ارزیابی دقیقی از وضعیت دندان داشت و از وسایل و تکنیک مناسب استفاده کرد.  }, keywords_fa = {واژه‏های کلیدی: عوارض,فضای تحت فکی,مولر سوم}, url = {https://jmds.mums.ac.ir/article_839.html}, eprint = {https://jmds.mums.ac.ir/article_839_85abf4db140173dc9f516152f8845649.pdf} }