@article { author = {OmidKhoda, SeyedehMaryam and ShahAkbari, Reza and Ghanbarzadeh, Majid and Ghanei, Saeideh and HoseiniZarch, SeyedHosein and Esmaily, Habibollah}, title = {Comparative Assessment of Anatomic and Machine Frankfort Plane to True Horizontal Plane in New Digital Radiographs}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {3}, pages = {173-182}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.477}, abstract = {Introduction: Contemporary cephalometric analysis in orthodontics is based on comparison between craniofacial portions and reference planes. One of these planes is Frankfort Horizontal (FH) Plane that can be made by anatomic portion or machine portion. The aim of this study was to determine and compare the angle between Anatomic Frankfort Horizontal plane (AFH) and True Horizontal (TH) with the angle formed by Machine Frankfort Horizontal plane (MFH) and TH. Materials & Methods: In this Analytical-descriptive study, digital lateral cephalograms were taken in Natural Head Position from 50 orthodontic patients with the minimum age of 14 and class I malocclusion (Viazis analysis on Onyx Ceph software was employed to confirm the class I malocclusion). Then on each cephalogram, two FH planes were constructed using machine and anatomic portions. Then the angle between each FH plane and TH plane was measured and recorded. Finally, the data were analyzed by paired t-test (a=0.05). Results: Machine Frankfort Horizontal plane (MFH) and Anatomic Frankfort Horizontal plane (AFH) showed significant differences of -5.66 and -1.58 degrees with True Horizontal plane (TH) respectively (P<0.001). Conclusion: For cephalometric evaluation in orthodontic patients if the Frankfurt plane be used, it is better to use anatomical portion, because the difference between the Anatomic Frankfort Horizontal plane (AFH) and True Horizontal plane (TH) is significantly less than the difference between the Machine Frankfort Horizontal plane (MFH) and True Horizontal plane (TH).}, keywords = {Key words: Anatomic portion,machine portion,Frankfort plane}, title_fa = {بررسی مقایسه‏ای پلن فرانکفورت آناتومیک و ماشینی نسبت به پلن افق واقعی در سفالوگرام های دیجیتال}, abstract_fa = {مقدمه: آنالیز سفالومتری در ارتودنسی بر پایه مقایسه بخش‏های مختلف کرانیوفاسیال نسبت به پلن‏های رفرنس می‏باشد. یکی از این پلن‏ها، پلن افقی فرانکفورت (FH)است که می‏تواند براساس دو نقطه پوریون آناتومیک و ماشینی رسم شود. هدف از این مطالعه تعیین و مقایسه زاویه بین پلن فرانکفورت آناتومیک و افق واقعی با زاویه بین پلن فرانکفورت ماشینی و افق واقعی بود. مواد و روش‏ها:در این مطالعه توصیفی-تحلیلی، 50 لترال سفالوگرام دیجیتال از بیماران کلاس یک ارتودنسی بالای 14 سال، در حالت Natural Head Position تهیه و توسط نرم افزار Onyx Ceph (Version 2.6.22) و براساس آنالیز Viazis تریس شدند تا صحت کلاس I بودن آنها تایید شود. برای هر بیمار دو پلن FH با دو پوریون آناتومیکو ماشینی رسم گردید. اختلاف زاویه هر یک از پلن‏های مذکور با پلن افق واقعی بررسی شدند و در نهایت داده‏ها توسط آنالیز آماری tزوجی با یکدیگر مقایسه شدند. سطح معنی‏داری برابر 05/0 در نظر گرفته شد. یافته‏ها: پلن فرانکفورت ماشینی و پلن فرانکفورت آناتومیک به ترتیب با میزان میانگین ˚66/5- و ˚58/1- اختلاف معنی‏داری با افق واقعی داشتند (001/0>P). نتیجه گیری: برای انجام ارزیابی‏های سفالومتریک در بیماران ارتودنسی در صورت استفاده از پلن فرانکفورت، بهتر است از پوریون آناتومیک استفاده شود چرا که اختلاف پلن فرانکفورت آناتومیک با افق واقعی به طور معنی‏داری کمتر از اختلاف پلن فرانکفورت ماشینی با افق واقعی بود.}, keywords_fa = {واژه‏ های کلیدی: پوریون آناتومیک,پوریون ماشینی,پلن فرانکفورت}, url = {https://jmds.mums.ac.ir/article_477.html}, eprint = {https://jmds.mums.ac.ir/article_477_5c082aa97cea1b305774784ae49f1c29.pdf} } @article { author = {Heidari, Bijan and HashemiArdakani, Zahra}, title = {Evaluation the Effect of Change in Convergence Angle of Tooth Preparation and Copping Thickness on Fracture Resistance of All Ceramic Crowns}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {3}, pages = {183-190}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.478}, abstract = {Introduction: Low fracture resistance is one of the most important disadvantages of all-ceramic restorations. The aim of the present study was to assess the effect of convergence angle and change in copping thickness related to it on fracture resistance of all ceramic crowns. Materials & Methods: This study was an experimentalstudy in which30 brass dies were fabricated as crowns with a height of 5.5mm, base diameter of 6.2mm and marginal thickness of 1.2mm in the following design:(10 shoulder 90˚ → Convergence 6˚), (20 shoulder 90˚ → Convergence 12˚). With a special index, 0.6mm thickness acrylic cores were made on 20 dies (10 with 6˚ convergence, 10 with 12˚ convergences). With the 6˚ index and 12˚ dies, 10 cores were made with the thickness of 0.6mm+difference in thickness of 6˚ and 12˚ convergence angle. Cores were casted with IPS e.max porcelain of core and veneered with another index with parallel cylindrical wall and then cemented with Panavia F2 on the brass dies. After storage in distilled water of 37˚c for 24 hours, the specimens were placed in compressive test ring within an Instron universal testing machine and loaded in the center of occlusal surface with a 4mm diameter stainless steel ball. An axial preload of 20N was applied followed by a compressive load until fracture occurred. The data were analyzed with one way analysis of variance (ANOVA). Results: Average fracture load in 6˚ convergence angle and 0.6mm core thickness was 1951.40N, in 12˚ convergence angle and 0.6mm core thickness, it was 2798.46N and in 12˚ convergence angle and 0.6mm+additional core thickness because of increase in convergence angle, it was 3151.05N. The results revealed no significant difference in the fracture load between two core thickness but fracture load of 12˚ convergence angle was significantly greater than 6˚ (P<0.001). Conclusion: Copping thickness didn’t affect the fracture load of all ceramic crowns but increase in convergence angle increased the fracture load significantly.}, keywords = {Key words: Taper,all ceramic restoration,copping}, title_fa = {بررسی اثر درجه تقارب تراش دندان و ضخامت کوپینگ بر مقاومت به شکست روکش‏های تمام سرامیک}, abstract_fa = {مقدمه: استحکام شکست پایین سرامیک‏ها از مهمترین معایب رستوریشن‏های تمام سرامیک است.هدف از مطالعه حاضر ارزیابی اثر دو فاکتور درجه تقارب و تغییر ضخامت کوپینگ ناشی از آن بر استحکام شکست روکش‏های تمام سرامیک بود. مواد و روش ها: در این مطالعه آزمایشگاهی، 30 کور برنجی به شکل کرون‏هایی به ارتفاع mm5/5 و عرض قاعده mm4/6 و ضخامت مارجین mm2/1 در دو گروه، 10 کور با شولدر 90 درجه و تقارب 6 درجه و 20 کور با شولدر90 درجه و تقارب 12 درجه تهیه شد. با کمک ایندکس‏های مخصوص، 20 کور آکریلی  mm6/0 بر روی دای‏ها به شرح زیر ساخته شد،  10 کور به ضخامت mm6/0 با تیپر˚ 6،  10 کور به   ضخامت mm6/0 با تیپر ˚12. با استفاده از ایندکس با تیپر ˚6 و دای‏های باقیمانده با تیپر ˚12، 10 کور آکریلی به ضخامت معادل mm6/0 به علاوه ضخامت ناشی از تفاوت زاویه تراش از 6 درجه به 12 درجه ساخته شد. کورها با پرسلن کور IPS e.max ریخته شدند و با استفاده از ایندکس دیگری به شکل سیلندرهایی با دیواره موازی ونیر شدند. کرون‏ها با سمان رزینی دوگانه سخت شونده Panavia F2 روی دای‏های برنجی سمان شدند.نمونه‏ها قبل از بارگذاری به مدت 24 ساعت در آب 37 درجه قرار گرفته و سپس در Universal Testing Machine با گوی به قطر mm4 ابتداتحت نیروی اولیه N20 و سپس نیروی فشاری تا حد شکست قرار گرفتند. میزان نیرو در زمان شکست بر حسب نیوتن ثبت شد. داده‏ها با استفاده از آنالیز واریانس یک طرفه بررسی گردید. یافته‏ها: میانگین نیروی شکست در تقارب 6 درجه با ضخامت mm6/0، 40/1951نیوتن و در تقارب 12 درجه با ضخامت mm6/0، 46/2798 نیوتن بود. از طرفی میانگین نیروی شکست در ضخامت کوپینگ mm6/0، به علاوه ضخامت ناشی از تفاوت زاویه تراش از 6 درجه به 12 درجه با تقارب 12 درجه، 05/3151 نیوتنبود. نتایج نشان داد که تفاوت آماری بین استحکام شکست در دو ضخامت کوپینگ وجود ندارد ولی بین دو درجه تقارب تفاوت قابل توجهی وجود داشت و استحکام در تقارب 12 درجه به طور قابل توجه بیشتر از 6 درجه بود (05/0P<). نتیجه گیری:ضخامت کوپینگ بر روی استحکام شکست کرون تمام سرامیک تاثیری نداشت اما با افزایش درجه تقارب استحکام شکست به طور قابل توجهی افزایش یافت.}, keywords_fa = {واژه‏ های کلیدی: تیپر,کرون تمام سرامیک,کوپینگ}, url = {https://jmds.mums.ac.ir/article_478.html}, eprint = {https://jmds.mums.ac.ir/article_478_18f46c8fb874f7035c7a0fad8c8d173a.pdf} } @article { author = {Seifi, Safoura and Feizi, Farideh and Khafri, Sorayya and Aram, Mehrdad}, title = {Histomorphometric Comparative Evaluation of Blood Vessels and Their Distribution Pattern in Follicular Cyst, Odontogenic Keratocyst and Ameloblastoma}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {3}, pages = {191-202}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.479}, abstract = {Introduction: Ameloblastoma is a benign epithelial odontogenic tumor that exhibits a more aggressive behavior than odontogenic keratocyst and follicular cyst. The purpose of this study was to determine and evaluate histomorphometric characteristics and blood vessels pattern adjacent to and far from odontogenic epithelium on the clinical behavior of the above odontogenic lesions with immunohistochemistry and morphometry method. Materials & Methods: In this descriptive-cross-sectional study, 45 paraffin blocks of mentioned lesions were selected and marked immunohistochemically with CD34. From three HPFs (High Power Fields) in each slide which had more density of blood vessels in adjacent to and far from odontogenic epithelium, photography was done by a camera joined to a microscope with 40 times magnification. Through the software Motic plus 2, the internal and external diameters, section surface and thickness were determined. Also the blood vessel pattern was determined in the mentioned lesions and was compared through ANOVA, t-test and Multiple Comparison Test. Results: The external and internal diameters and sectional surface in the regions far from the odontogenic ephithelium in ameloblastoma was greater than keratocyst (P<0.001) and dentigerous cysts (P=0.001) but there was no significant statistical differences seen in the thickness of blood vessels in the regions far from the odontogenic ephithelium in three lesions (P=0.05). Significant statistical difference was not seen in external (P=0.8) and internal (P=0.8) diameters, sectional (P=0.6) surface and blood vessels thickness in the adjacent regions of odontogeni ephithelium in these three lesions. The pattern of blood vessels in ameloblastoma was circumferential and in the keratocyst and follicular cyst, it was directional. Conclusion: It seems that morphometric characteristics of blood vessels (internal and external diameters, sectional surface) in areas far from odontogenic ephithelium and the type of blood vessels pattern affects clinical aggressive behavior of ameloblastoma more than keratocyst and follicular cyst.}, keywords = {Key words: Ameloblastoma,Odontogenic keratocyst,follicular cyst,CD34,Morphometry}, title_fa = {بررسی مقایسه ‏ای هیستومورفومتریک عروق خونی و آرایش آنها در کیست فولیکولار، ادنتوژنیک کراتوسیست و آملوبلاستوما}, abstract_fa = {مقدمه: آملوبلاستوما، تومور خوش‏خیم اپی‌تلیالی با رفتار تهاجی بالینی نسبت به ادنتوژنیک کراتوسیست و کیست فولیکولار است. هدف مطالعه حاضر تعیین و ارزیابی ویژگی‌های هیستومورفومتری عروق خونی در نواحی مجاور و دور از اپی‏تلیوم ادنتوژنیکو آرایش آن‏ها بر رفتار تهاجمی بالینی ضایعات فوق بود. مواد و روش‏ها: در این مطالعه توصیفی، 45 بلوک پارافینه از ضایعات ادنتوژنیک مذکور انتخاب شد و رنگ‌آمیزی ایمونوهیستوشیمی با نشانگر CD34 انجام شد. از 3 فیلد میکروسکوپی در هر اسلاید که دارای تراکم عروق خونی بیشتر بود، در نواحی مجاور و دور از اپی تلیوم ادنتوژنیک توسط دوربین متصل به میکروسکوپ با بزرگنمایی 40 برابر، عکسبرداری شد، سپس با نرم‌افزار Plus2 Motic متصل به میکروسکوپ، قطر داخلی، خارجی، سطح مقطع و ضخامت دیواره عروق خونی تعیین گردید. همچنین آرایش عروق خونی در ضایعات مذکور تعیین و نتایج با آنالیز آماری ANOVA, t-test, Multiple Comparison Test تجزیه و تحلیل شد. یافته‏ها: قطر خارجی، قطر داخلی، سطح مقطع عروق خونی در نواحی دور از اپی تلیوم ادنتوژنیک به ترتیب درآملوبلاستوما بیشتر از کراتوسیست (001/0P<) و کیست فولیکولار (001/0=P) بود؛ اما در ضخامت دیواره عروق خونی در نواحی دور از اپی تلیوم ادنتوژنیک در سه ضایعه فوق اختلاف آماری معنی‌داری دیده نشد (05/0=P). اختلاف آماری معنی‌داری در ارتباط با قطر خارجی (8/0=P)، داخلی (8/0=P)، سطح مقطع (6/0=P) و ضخامت دیواره عروق خونی (4/0=P) در نواحی مجاور اپی تلیوم ادنتوژنیک در سه ضایعه فوق مشاهده نشد. آرایش عروق خونی در آملوبلاستوما Circumferential و در کراتوسیست و کیست فولیکولار، Directional بود. نتیجه‌گیری:به نظر می‌رسد که ویژگی‏های مورفومتری عروق خونی (قطر داخلی، خارجی و سطح مقطع) در نواحی دور از اپی‏تلیوم ادنتوژنیک و نوع آرایش عروق خونی بر رفتار تهاجمی بالینی آملوبلاستوما نسبت به کراتوسیست و کیست فولیکولار مؤثر باشد.}, keywords_fa = {واژه‏ های کلیدی: آملوبلاستوما,ادنتوژنیک کراتوسیست,کیست فولیکولار,CD34,مورفومتری}, url = {https://jmds.mums.ac.ir/article_479.html}, eprint = {https://jmds.mums.ac.ir/article_479_fa95cd5a020a4161b473833607c401b3.pdf} } @article { author = {Shahsavari, Fatemeh and Sadri, Donya and Tabari, SeyedehSara}, title = {Expression of P27 Protein in Oral and Esophageal Squamous Cell Carcinoma}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {3}, pages = {203-210}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.480}, abstract = {Introduction: Squamous cell carcinoma (SCC) is the most common malignant tumor of oral cavity (O) and esophagus (E). P27 protein has a significant role in biological behavior of the tumors. The purpose of this study was to determine the frequency of P27 expression in OSCC and ESCC. Materials & Methods: Forty paraffin embedded blocks of OSCC & ESCC were collected & clinic pathological data were recorded in this descriptive study. Immunohistochemical staining (IHC) was done for P27 (Kip1) & Labeling Index (percent of positive cells in 10HPF) was calculated and then cases classified in to low (LI≤25%) and high (LI>25%) expressions. Statistical analysis was performed by SPSS16 using Fisher's exact and Mann-Whitney tests. Results: Twenty-four cases (60%) were male and 16 cases (40%) were female. The mean age was 65.3±14.3. Twenty five percent of ESCCs and 10% of OSCCs showed high expression of P27. Seventy five percent of ESCC and 90% off OSCC showed low expression and there was no significant difference among OSCCs and ESCCs (P>0.05). There were no significant correlations between age, sex, grade or size of the tumors and P27 expression in OSCCs and ESCCs. Conclusion: Low expression of P27 was found in most of ESCC and OSCC cases.}, keywords = {Key words: Squamous cell carcinoma,Oral,Esophagus,P27 (Kip1)}, title_fa = {بررسی فراوانی بیان پروتئین P27 درکارسینوم سلول سنگفرشی دهان و مری}, abstract_fa = {مقدمه: اسکواموس سل کارسینوما (SCC) شایع‏ترین توموربدخیم دهان و مری است. پروتئین P27 به عنوان نشانگر تمایز سلولی، در تعیین رفتار بیولوژیک تومورها نقش مؤثری دارد. هدف از این مطالعه، تعیین فراوانی بروز نشانگر P27 در اسکواموس سل کارسینوم دهان و مری بود. مواد و روش‏ها: در این مطالعه توصیفی، 40 بلوک پارافینه مربوط به بیماران مبتلا به SCC دهان و مری (هر گروه 20 مورد) انتخاب شدند. خصوصیات کلینیکوپاتولوژیک نمونه‏ها ثبت شد سپس نمونه‏ها به روش ایمونوهیستوشیمی (IHC) جهت نشانگر P27 رنگ‏آمیزی شدند. سلول‏های مثبت در 10 شان میکروسکوپی به طور تصادفی شمارش شدند و درصد سلول‏های مثبت (Labeling Index) ثبت شد و به دو گروه بیان ضعیف (25%≥) و بیان قوی (25%<) تقسیم شدند. یافته‏ها با کمک نرم‏افزار SPSS با ویرایش 16 با آماره آزمون دقیق فیشر و آزمون من ویتنی تحت واکاوی آماری قرارگرفت. یافته ها: از 40 نمونه مورد بررسی، 24 مورد (60%) مذکر و 16 مورد (40%) مؤنث بودند. میانگین سنی مبتلایان 3/14±3/65 سال بود. از لحاظ  بروز P27،  25%  نمونه‏های SCC مری و  10%  نمونه‏های دهانی  در گروه بیان قوی قرار داشتند و  75% نمونه‏های SCC  مری و  90% نمونه‏های دهانی در گروه بیان ضعیف قرار داشتند که بین دو گروه تفاوت معنی‏دار دیده نشد (05/0<(P. ارتباط معنی‏داریبین سن، جنس، درجه تمایز و اندازه تومورها با بروز P27 دیده نشد. نتیجه‏گیری: براساس نتایج مطالعه حاضر، نمونه‏های SCC مری و دهان از نظر بروز نشانگر  P27در محدوده بیان ضعیف هستند.}, keywords_fa = {واژه‏ های کلیدی: اسکواموس سل کارسینوما,دهان,مری,P27(Kip1)}, url = {https://jmds.mums.ac.ir/article_480.html}, eprint = {https://jmds.mums.ac.ir/article_480_77945d5513bc2e42e84ee20a54953f68.pdf} } @article { author = {Sanatkhani, Majid and Molla, Zohreh and Akbari, Majid}, title = {Evaluation of the Students’ Perception about Clinical Education and Examination in Mashhad School of Dentistry (Iran) in 2009}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {3}, pages = {211-222}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.481}, abstract = {Introduction: Evaluation of educational processes in different fields of medical sciences has high priority because of the important role in professional experts training. Dentistry, as an important field of medical sciences, requires scientific & professional skills. Surveying the opinions of dental students as the main actual consumers of the education is one of the most popular methods to evaluate the quality of dental clinical education. The aim of this study was to evaluate the students’ perception about clinical education and examination in Mashhad dental school in 2009. Materials & Methods: All students at fourth, fifth and sixth grades of Mashhad dental school in 2009, were participated in this cross-sectional study. A questionnaire was designed in this study to assess clinical education. The validity and reliability of the questionnaire was proved. The results were presented in tables. Kruskal Wallis test was used to compare between groups (α=0.05). Results: The results showed that the students’ perception, in most areas of education, performance of clinical faculty, clinical facilities, clinical assessment, evaluation of students’ activities by professors, nurses cooperation and educational purposes was positive while there were some deficiencies particularly in course selection, and monitoring student’s work in a few departments. There was no difference between clinical education and evaluation of departments in dental school in students’ points of view. Conclusion: It can be concluded that revision of school activities & review of curriculum for possible changes, providing equipment and materials required in the clinical environment is suggested.}, keywords = {Key words: Clinical education,Dental Student,Clinical Evaluation}, title_fa = {بررسی دیدگاه دانشجویان درباره نحوه آموزش و ارزشیابی واحدهای بالینی دانشکده دندانپزشکی مشهد-ایران در سال 1388}, abstract_fa = {مقدمه: ارزشیابی شیوه‏‏های آموزشی در رشته‏های مختلف علوم پزشکی، به دلیل نقش مهم آن در تربیت نیروهای متخصص حرفه ای، از حساسیت ویژه و بالایی برخوردار است. رشته دندانپزشکی نیز یکی از شاخه‏های مهم علوم پزشکی است که نیازمند کسب مهارت‏های علمی و حرفه‏ای‏ بالاست. یکی از شیوه‏های عملی جهت ارزیابی کیفیت آموزش‏های بالینی در رشته ی دندانپزشکی، بررسی نظرات و دیدگاه‏های دانشجویان این رشته به عنوان مخاطبان اصلی این آموزش‏ها می‏باشد. لذا این مطالعه به منظور تعیین دیدگاه دانشجویان دندانپزشکی دانشگاه علوم پزشکی مشهد درباره نحوه آموزش و ارزشیابی واحدهای بالینی، در سال 1388 انجام شد.   مواد و روش‏ها: این پژوهش، مطالعه‏ای‏ توصیفی-تحلیلی و مقطعی بوده و نمونه پژوهش، دانشجویان سال‏های چهارم، پنجم و ششم دانشکده دندانپزشکی مشهد در سال 1388 بود. ابزار گردآوری داده‏ها، پرسشنامه و شیوه گردآوری آن به صورت میدانی بود. پس از طراحی پرسشنامه، روایی و پایایی آن مورد تأیید قرار گرفت. پس از جمع‏آوری پرسشنامه‏ها، نتایج در قالب آمار توصیفی، جمع‏بندی شده و در قالب جداولی ارائه شد. نمرات به دست آمده در بخش‏های مختلف با آزمون کروسکال والیس با یکدیگر مقایسه شد. (05/0=α) یافته ها: یافته‏های تحقیق، نشان داد که دیدگاه دانشجویان، در اغلب حیطه‏های آموزشی، عملکرد اساتید بالینی، امکانات و تجهیزات محیط بالینی، ارزشیابی بالینی، ارزیابی فعالیت دانشجو توسط اساتید، همکاری پرسنل پرستاری، اهداف آموزشی بخش و غیره، مثبت بود ولی کمبودهایی نیز در این زمینه، خصوصاً در مورد نحوه انتخاب واحد دانشجویان، نظارت اساتید بر نحوه کار دانشجویان و زمان حضور اساتید در تعدادی از بخش‏ها وجود داشت. نتایج نشانگر این بود که از نظر دانشجویان آموزش و ارزشیابی در بخش‏های مختلف با یکدیگر تفاوت معنی‏دار نداشت. نتیجه‏گیری: با توجه به نتایج فوق، بازنگری در فعالیت‏های آموزشی مسئولان دانشکده، بررسی مجدد کوریکولوم آموزشی، فراهم کردن تجهیزات و وسائل لازم در محیط بالینی، پیشنهاد می‏گردد.}, keywords_fa = {واژه‏ های کلیدی: آموزش بالینی,دانشجوی دندانپزشکی,ارزشیابی بالینی}, url = {https://jmds.mums.ac.ir/article_481.html}, eprint = {https://jmds.mums.ac.ir/article_481_71497a093953bb81df8f58dae18b9222.pdf} } @article { author = {Tabakhian, GholamReza and Nouri, Azar}, title = {Effect of Different Temporary Cements on Retention of Crowns Cemented on One Piece Abutments with Two Different Lengths}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {3}, pages = {223-230}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.482}, abstract = {Introduction: To ensure retrievability of cemented implant-retained restorations, use of provisional cements has been suggested as an alternative to that of definitive ones. Some cements are stronger than other ones. To maintain retrievability, selection of the provisional cement is important. The aim of this study was to compare the tensile strength of three different temporary cements in crowns cemented on one piece abutments with two lengths. Materials & Methods: Twenty DIO implant analogs were fixed in an acrylic block using a dental surveyor. Blocks were divided in to two groups of 10 abutments. In one group, solid abutments with 3.5mm diameter and 5.5mm height and in the other one, abutments with 3.5mm diameter and 7 mm height were placed in each implant analogs and torque to 30 N.cm. After fabrication of crown for each abutment, provisional luting agents Temp bond, Dycal and Temp bond clear were used to cement the crowns to the respective abutments. All specimens were stored in 100% humidity environment for 48 hours at 37°c prior to testing. Crowns were pulled from abutments with a universal testing machine at a cross head speed of 0.5 cm/min and tensile strength was recorded in Newton. Data were analyzed using 2-way analysis of variance (ANOVA). Results: Tensile strength was significantly higher for Dycal (138.6) than for Temp bond clear (68.3) and Temp bond (30.3) (P<0.001). Also for each type of cement, the mean tensile strength was significantly higher at 7×3.5mm abutments compared with 5.5×3.5mm (P=0.006). Conclusions: It is preferred to use Temp bond while we need retrievabibity of cement retained fixed implant restorations and Dycal while we need higher retention.}, keywords = {Key words: Implant,Retention,Abutment,Crown,temporary cement}, title_fa = {تأثیر سه نوع سمان موقت بر میزان گیر روکش‏های سمان‏شونده روی اباتمنت‏های یک قطعه‏ای با دو طول مختلف}, abstract_fa = {مقدمه: استفاده از سمان‏های موقت برای سمان کردن پروتزهای متکی بر ایمپلنت، مزیت سهولت قابلیت بازیابی را داراست. بعضی از این سمان‏ها دارای گیر بیشتر و بعضی دارای گیر ضعیف‏تری می‏باشند. بنابراین انتخاب سمان موقت در نگهداری این مزیت (دسترسی مجدد) حائز اهمیت است. هدف از این مطالعه، مقایسه تأثیر سه نوع سمان موقت بر میزان گیر روکش‏های سمان‏شونده بر اباتمنت‏های یک قطعه‏ای با دو طول مختلف بود.       مواد و روش‏ها: در این مطالعه تجربی-ازمایشگاهی 20 عدد آنالوگ ایمپلنت DIO با استفاده از سرویور درون بلوک‏های تهیه شده از آکریل خودسخت‏شونده قرار داده شدند. بلوک‏ها به دو گروه 10 تایی تقسیم شدند. در یک گروه اباتمنت‏های یک قطعه‏ای به قطر 5/3 و ارتفاع 5/5 میلی‏متر و در گروه دیگر قطر 5/3 و ارتفاع 7 میلی‏متر، به آنالوگ‏های ایمپلنت با تورک 30 نیوتن سانتی‏متر متصل گردیدند. بعد از ساخت کوپینگ برای هر اباتمنت سمان‏های موقت تمپ‏باند، دایکال و تمپ‏باند کلیر برای اتصال کوپینگ به اباتمنت مربوط به کار رفتند. تمام نمونه‏ها قبل از آزمایش، در رطوبت 100% و دمای 37 درجه سانتی گراد برای مدت 48 ساعت نگهداری شدند. کوپینگ‏ها با سرعت 5/0 سانتی‏متر در دقیقه با استفاده از دستگاه یونیورسال تستینگ از روی اباتمنت‏ها کشیده شدند و میزان گیر به نیوتن ثبت گردید. داده‏ها با استفاده از آزمون واریانس دوطرفه ارزیابی گردیدند. یافته‏ها: میزان گیر دایکال (6/138 نیوتن) به طور معنی‏داری از تمپ باند کلیر (3/67 نیوتن) و تمپ باند (3/30 نیوتن) بیشتر بود (001/0P<). همچنین برای هر نوع سمان، میزان گیر به طور معنی‏داری در اباتمنت با ارتفاع 7 میلی‏متر در مقایسه با اباتمنت دارای ارتفاع 5/5 میلی‏متر بیشتر بود (006/0=P). نتیجه گیری: جهت سمان روکش به اباتمنت‏ها، بهتر است زمانی که دسترسی مجدد آسان‏تر به پروتزهای ثابت سمان‏شونده مورد نیاز است از سمان تمپ باند و زمانی که گیر بیشتر مورد نیاز است از دایکال استفاده شود.}, keywords_fa = {واژه‏ های کلیدی: ایمپلنت,گیر,اباتمنت,روکش,سمان موقت}, url = {https://jmds.mums.ac.ir/article_482.html}, eprint = {https://jmds.mums.ac.ir/article_482_174b71c3faf99ac81b1e0d737b660937.pdf} } @article { author = {Ajami, Behjatolmolook and Abachizadeh, Hamed and Shafieyan, Reyhaneh and Aminifar, Sooran}, title = {Evaluation of Microleakage in Pulpotomized Primary Molars Restored with Core max II: An In Vitro Study}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {3}, pages = {231-238}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.483}, abstract = {Introduction: Routine materials used for restoration and reconstructionof primary teeth are composite resins, glass ionomers, amalgam and stainless steel crowns. The purpose of this study was to determine the amount of microleakage in pulpotomized primary molars restored with core max II (one kind of adhesive restorative materials). Materials & Methods: Thirty extracted primary molars were selected. After being cleaned, the teeth were pulpotomized and then covered with Zinc Phosphate as liner. The MOD cavity outline was performed with buccolingual width of 2/3 of the distance between cusp tips, and the gingival floor finished at CEJ level. Then, the teeth were divided into two equal groups of 15. Teeth in group A were restored with amalgam, whereas the others in group B were restored with Core max II. Both groups were carried to artificial mouth staying for 2 days, followed by a one-week period resting in incubator. Apices of the teeth were sealed with wax and the entire tooth surface, except for the restored zone and 1 mm beyond it, were covered with two layers of varnish and then they were floated in a special liquid paint, called Basic Fuchsin 20%. Next, roots of the teeth were cut three mm below the CEJ. After that, the teeth were mounted in epoxy resin up to 1 mm below the CEJ level. After 24 hours, all of the specimens were sectioned mesiodistally. Finally the specimens were examined with a steriomicroscope in order to determine the amount of microleakage.Using the SPSS software version 11.5 at 5% significance level, the results were analysed with Mann-Whitney U test. Results: Paint penetrationintensity in restored teeth with no microleakage was equal in group A and B. There were minor differences between these two restorative materials when microleakage penetrated to either half of gingival wall or to all of gingival wall. Paint penetrationintensity in group A was equal with that of group B when microleakage penetrated in axial wall. The difference in the amount of microleakage between amalgam and Core max II was not significant (P>0.05). Conclusion: According to the results of this study, since the amount of microleakage in Core max II was as low as amalgam, it can be used as an suitable alternative restorative material in pulpotomized primary molars.}, keywords = {Key words: Core max II,Amalgam,Microleakage}, title_fa = {ارزیابی ریزنشت ترمیم‏های Core max II در دندان‏های مولر شیری پالپوتومی شده: یک مطالعه آزمایشگاهی}, abstract_fa = {مقدمه: معمول‏ترین موادی که جهت ترمیم و بازسازی دندان‏های شیری در دندانپزشکی کودکان به کار رفته است، شامل کامپوزیت رزین ها، گلاس آینومرها، آمالگام و کرون‏های استنلس استیل می‏باشد. هدف از این مطالعه بررسی میزان ریزنشت Core max II (نوعی کامپازیت رزین) در ترمیم دندان های مولر شیری پالپوتومی شده بود.   مواد و روش‏ها: در این مطالعه تجربی-آزمایشگاهی30 عدد دندان مولر شیری کشیده شده انتخاب شدند. بعد از تمیز کردن، دندان‏ها پالپوتومی شدند و حفرات توسط لایه‏ای از زینک فسفات به عنوان لاینر پوشیده شدند. سپس حفرات MOD به عرض دو سوم بعد باکولینگوالی از راس کاسپ ها، در حالی که کف باکس در ناحیه CEJ بود، تهیه شدند. دندان‏ها به دو گروه پانزده تایی تقسیم شدند. دندان‏ها در گروه A با آمالگام و در گروه B با Core max II ترمیم شدند. هر دو گروه به مدت 2 روز در دستگاه دهان مصنوعی به مدت یک هفته در انکوباتور قرار گرفتند. آپکس دندان‏ها با موم بسته شدند و به جز قسمت ترمیم شده و یک میلیمتر ورای آن با دو لایه و ارنیش پوشانده شدند. نمونه‏ها در یک نوع ماده رنگی با نام فوشین بازی 20% غوطه ور شدند. ریشه دندان‏ها از mm 3 CEJ قطع شدند و دندان‏ها در اپوکسی رزین تا mm 1 زیر CEJ مانت شدند. بعد از 24 ساعت همه نمونه‌ها به صورت مزیو دیستالی برش داده شدند. نمونه‏ها توسط استرئومیکروسکوپ برای بررسی میزان ریزنشت بررسی شدند. برای تحلیل نتایج از آزمون Mann-Whitney u test استفاده گردید. یافته‏ها: شدت نفوذ رنگ در دندان‏های ترمیم شده بدون ریزنشت در گروه A و B با هم برابر بودند. این دو ماده ترمیمی، در موارد ریزنشت تا نصف ضخامت دیواره جینجیوالی و همچنین ریزنشت تا تمام ضخامت دیواره جینجیوالی تفاوتی اندکی نشان دادند. شدت نفوذ رنگ در دندان‏های ترمیم شده وقتی ریزنشت در دیواره اگزیالی منتشر شده بود، در گروه A و B با هم برابر بودند. تفاوت بین میزان ریز نشت در آمالگام و  Core max II معنی‏دار نبود (05/0P<). نتیجه گیری: پس از انجام مطالعات آزمایشگاهی و کلینیکی بیشتر بر روی سایر خواص Core max II، به علت ریزنشت پایین قابل مقایسه آن با آمالگام‌، این ماده به عنوان ترمیم مناسبی جهت دندان‏های مولر شیری پالپوتومی شده می‏تواند به کار برده شود.}, keywords_fa = {واژه‏ های کلیدی: Core max II,آمالگام,ریزنشت}, url = {https://jmds.mums.ac.ir/article_483.html}, eprint = {https://jmds.mums.ac.ir/article_483_8d3050cbfb30acd96fa49f3a69986cc2.pdf} } @article { author = {MoghareAbed, Ahmad and Izadi, Mozhgan and Kave, Maede and Tavakoli, Mohammad and Yaghini, Jaber}, title = {Comparative Study Investigating Abrasive Effects of 12 Commercially Available Toothpastes on Enamel, in Iran}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {3}, pages = {239-248}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.484}, abstract = {Introduction: An ideal toothpaste should have most plaque removal efficacy with at least abrasivity. The aim of this study was to evaluate enamel abrasion induced by 12 toothpaste types including Darogar 3, Nasim, Crest 7, Crest sensitivity, whitening signal, sehat, pooneh 3 color, paveh, whitening pooneh, crest 3D white, sensodine original and pooneh sensitivity.Materials & Methods: This was an in vitro experimental study. Dental samples collected after cutting were embedded in acrylic blocks, and the enamel surface polished to be smooth. The samples were divided into six groups of twelve. The initial surface profile was measured with the profilometry device and for brushing; the samples were located in V8cross brushing machine. After washing and drying the samples, the secondary surface profile was measured with the profilometry device again. The value difference before and after brushing shows abrasion of the toothpaste on single micron. Data were analyzed by means of ONE WAY ANOVA.Results: There was no significant difference in abrasivity among different toothpastes. The highest rate and the lowest rate of abration were observed in crest sentifivity and pooneh sensivity, respectively. The abration sensitivity pooneh; rate of other toothpastes were between these two rates.Conclusion: According to the results it has been revealed that there were no differences among enamel abrasion of common Iranian toothpastes.}, keywords = {Key words: Toothpaste,dental enamel,abrasion,profilometry}, title_fa = {بررسی مقایسه ‏ای تأثیر دوازده نوع خمیردندان رایج مصرفی در ایران بر سایش مینای دندان}, abstract_fa = {چکیدهمقدمه: سایش خمیردندان‏ها یکی از موارد مهم جهت انتخاب آنها توسط دندانپزشکان می‏باشد و تولیدکنندگان سعی دارند با ارائه هرچه بهتر محصولات استاندارد این مهم را فراهم کنند. هدف از این تحقیق بررسی سایش مینا توسط 12 نوع خمیردندان شامل داروگر 3، نسیم معمولی، کرست 7، ضدحاسیت کرست، سیگنال سفیدکننده، صحت، پونه سه رنگ، پاوه، پونه سفیدکننده، 3D وایت کرست، سنسوداین ارجینال، ضدحساسیت پونه بود.  مواد و روش ها: در این پژوهش آزمایشگاهی، چند تا نمونه‏های دندانی جمع‏آوری شده بعد از برش، در آکریل مدفون شدند و سطح مینای آنها پالیش شد تا صاف شوند. نمونه‏ها به شش گروه دوازده تایی تقسیم شدند. سپس پروفایل سطحی اولیه آنها با دستگاه پروفیلومتر اندازه‏گیری شد. جهت مسواک زدن، نمونه‏ها در دستگاه سایش  V8 cross brushingقرار گرفتند و بعد از شستن و خشک کردن نمونه‏ها، پروفایل سطحی ثانویه آنها با دستگاه پروفیلومتر اندازه‏گیری شد. اختلاف اعداد به دست آمده قبل و بعد از سایش نشان‏دهنده میزان سایش خمیردندان‏ها بود. نتایج توسط آزمون  ONE WAY ANOVAمورد تجزیه و تحلیل آماری قرار گرفت.یافته ها: این مطالعه نشان داد از حیث شاخص سایش، اثر نوع خمیردندان معنی‏دار نبود. با بررسی میزان سایش ناشی از 12 نوع خمیردندان، بیشترین سایش در خمیردندان ضدحساسیت کرست و کمترین سایش در خمیردندان ضدحساسیت پونه مشاهده گردید. سایش در خمیردندان‏های سفید‏کننده پونه، داروگر، کرست 7، پاوه، پونه، سنسوداین، 3D وایت کرست، سیگنال، صحت، نسیم به ترتیب از بیشترین به کمترین در حد فاصل این مقادیر سایش بود.نتیجه گیری:با توجه به یافته‏های مطالعه حاضر، تفاوت معنی‏داری میان سایش مینایی خمیردندان‏های مصرفی در ایران با یکدیگر وجود نداشت.}, keywords_fa = {واژه‌های کلیدی: خمیردندان,مینای دندان,سایش,پروفیلومتری}, url = {https://jmds.mums.ac.ir/article_484.html}, eprint = {https://jmds.mums.ac.ir/article_484_833d9df4ebbc67552f8d0d2d4017b9ad.pdf} } @article { author = {YaghotiKhorasani, MohammadMehdi and Norozzadeh, Zohrehsadat}, title = {Comparison of Apical Seal of Three Root Canal Sealers (AH26 , AHPlus and Tubliseal) in Root Canal Obturated by Lateral Condensation Technique}, journal = {Journal of Mashhad Dental School}, volume = {36}, number = {3}, pages = {249-258}, year = {2012}, publisher = {Mashhad University of Medical Sciences, School of Dentistry}, issn = {1560-9286}, eissn = {2008-2347}, doi = {10.22038/jmds.2012.486}, abstract = {Introduction: A good apical seal plays a critical role in the success of endodontic treatment. The most common cause of treatment failure has been the lack of root apical seal. The aim of this study was to compare the apical seal of three root canal sealers including AH26 , AH Plus and Tubliseal together and with positive and negative groups, using a dye penetration test. Materials & Methods: One hundred and ten humon upper central teeth were used in this study. Teeth were kept in 10% formalin solution and then were maintained for three days in 5.25% NaOCl. The teeth were randomly divided into three experimental groups (N=30) and two negative and positive control groups. After debridement of the external surfaces the crowns were cut at the CEJ, and were instrumented by stepback technique and obturated using lateral condensation technique with gutta-percha and either AH26 , AH Plus or Tubliseal. In positive control group, after preparation, the canals were filled with gutta-percha without sealer, and in negative control group, the canals were prepared but not filled. Two mm of coronal canals were filled with amalgam and negative control group were coated with two layers of nail polish and one layer of sticky wax, and next, were incubated for 72 hours after that, the surface of the other teeth except 2mm in apical area was coated with nail polish and wax. Finally then the teeth were centrifuged with India Ink and kept in ink for 72 hours. After longitudinally sectioning, the amount of dye penetration was measured under the stereomicroscope by three individuals who were blind to the groups. Data were analyzed by ANOVA and post hoc Tukey HSD test, through SPSS 15 software. Result: Higher level of dye penetration was observed in group B (Tubliseal) which was significantly greater than the rate in groups A (AH26) and C (AHPlus), while the difference observed between groups A and C was not statistically significant. Conclusion: The results of this study showed that although AHPlus is better than AH26 , there was no statistically significant difference in apical seal of AH26 and AH Plus sealers: However, the leakage of them was significantly less than that of Tubliseal sealer.  }, keywords = {Key words: Apical seal,sealer,AH26,AHPlus,Tubliseal,lateral condensation}, title_fa = {مقایسه سیل آپیکال سه نوع کانال سیلر AH26، AHPlus و Tubliseal در پر کردن کانال به روش تراکم جانبی}, abstract_fa = {مقدمه: سیل آپیکالی مناسب نقش مهمی در موفقیت درمان کانال ریشه دارد. شایع‏ترین علت شکست درمان ریشه را فقدان سیل آپیکالی مناسب دانسته اند. هدف این مطالعه مقایسه سیل آپیکالی سه نوع کانال سیلر AH26، AHPlus و Tubliseal با هم و با گروه‏های کنترل منفی و مثبت به روش Dye Penetration در شرایط آزمایشگاهی بود.         مواد و روش‏ها: تعداد 110 عدد دندان کشیده شده سانترال بالای انسان که پس از کشیده شدن در محلول فرمالین 10% قرار گرفت، به مدت یک ساعت در محلول هیپوکلریت سدیم 25/5% نگهداری شدند، سپس دندان‏ها به صورت تصادفی در سه گروه 30 تایی و دو گروه کنترل منفی و مثبت تقسیم شدند که پس از دبریدمان سطوح خارجی و قطع تاج از ناحیه CEJ، کانال‏ها با تکنیک Step back آماده سازی و سپس بوسیله گوتاپرکا و سه نوع سیلر AH26، AHPlus و Tubliseal به روش تراکم جانبی پر شدند. در گروه کنترل مثبت کانال‏ها پس از آماده سازی با گوتا پرکا و بدون سیلر پر شدند و در گروه کنترل منفی کانال‏ها آماده سازی ولی پر نشدند. mm2 کرونالی کانال‏ها با آمالگام پر شد و گروه کنترل منفی با دو لایه لاک ناخن و یک لایه موم چسب پوشانده شد و تمام دندان‏هابه مدت 72 ساعت درون انکوباتور قرار گرفتند. سطح خارجی سایر دندان‏ها نیز به جز در ناحیه mm2 آپیکال با دو لایه لاک ناخن و یک لایه موم چسب پوشانده شد و همراه با India Ink سانتریفوژ شد و سپس به مدت 72 ساعت درون جوهر غوطه ور گردیدند. سپس دندان‏ها برش طولی داده شدند و مقدار نفوذ رنگ در زیر استریو میکروسکوپ، اندازه گیری شد. داده‏هاتوسط نرم افزار آماری SPSS با ویرایش 15 و آزمون آماری ANOVA و پس آزمون Tukey آنالیز شدند. یافته ها: میانگین میزان نفوذ رنگ در گروه آزمایشی Tubliseal به طور معنی‏داری بیش از این میزان در گروه‏های آزمایش AH26 و AHPlus بود؛ در حالی که اختلاف مشاهده شده بین گروه‏های AH26 و AHPlus از نظر آماری معنی‏دار نبود (001/0P<). نتیجه گیری: نتایج مطالعه حاضر نشان داد که اگرچه AHPlus بهتر از AH26 است، اما این دو سیلر از نظر خاصیت سیل آپیکالی تفاوت آماری معنی‏داری را نشان ندادند، البته قدرت سیل آنها نسبت به سیلر Tubliseal به صورت معنی‏داری بیشتر بود.  }, keywords_fa = {واژه‏های کلیدی: سیل آپیکالی,سیلر,AH26,AHPlus,Tubliseal,تراکم جانبی}, url = {https://jmds.mums.ac.ir/article_486.html}, eprint = {https://jmds.mums.ac.ir/article_486_bedd147e86b569814fe5d45694f797aa.pdf} }